Primers & Preparation
Super Grip
Water-based primer for preparing porous and low-absorption surfaces before applying cement-based adhesives, levelling compounds and coatings.
Improves adhesion and controls substrate absorption on supported surfaces including concrete, existing tiles, marble, mosaics and other difficult or dense substrates.
- Consumption
- Approximately 0.2 kg/m²
- Form
- Liquid acrylic emulsion
- Density
- Approximately 1.00 kg/L
- pH
- Approximately 9
Product specification
Technical information
Performance
- Consumption
- Approximately 0.2 kg/m²
- Form
- Liquid acrylic emulsion
- Density
- Approximately 1.00 kg/L
- pH
- Approximately 9
Suitable applications
- Increasing adhesion of supported cementitious adhesives and coatings
- Regulating substrate absorption and consolidating supported surfaces
- Preparing porous, dense or low-absorption substrates as directed in the TDS
Suitable substrates
- Cementitious screeds and renders
- Ceramic tile
- Natural stone
- Metal
- Timber
Packaging
- Package
- 1 kg
- Package
- 5 kg
- Package
- 20 kg
Package options shown are product data. Confirm New Zealand availability before ordering.
Limitations & preparation
- The substrate must be stable and free from loose material, dirt, oil and dust.
- Varnishes and paints must be removed completely before application.
Read the current Technical Data Sheet before specification or use.
Application guidance
- Porcelain tiles on an interior concrete floor
Dry-interior installation for porcelain tiles up to 600 × 600 mm on cured, SR1-flat concrete using Super Grip, Super Acrylic and Perla grout.
- Tiling over existing ceramic tiles
Dry-interior tile-over-tile installation using Super Grip followed by Bauflex Fiber.
- Floor levelling over dense or low-absorption substrates
Preparation and levelling of a smooth, dense or low-absorption interior substrate using Super Grip followed by a 2-10 mm Hardox Flu-100 levelling layer.
Need help with Super Grip?
Confirm product suitability, availability or project-specific requirements with NZ Bauer Components.