Tile Adhesives
Bauflex Fiber
Flexible, fibre-reinforced adhesive for ceramic, porcelain, mosaic and non-moisture-sensitive natural stone, including large-format and demanding wall and floor installations.
A C2TE S1 deformable, low-dust adhesive for interior and exterior applications requiring increased flexibility, adhesion and resistance to moisture, frost and thermal movement.
- Classification
- C2TE S1 to EN 12004
- Consumption
- 1.5-4.0 kg/m²
- Application thickness
- Up to 15 mm
- Pot life
- Approximately 5 hours
Product specification
Technical information
Performance
- Classification
- C2TE S1 to EN 12004
- Consumption
- 1.5-4.0 kg/m²
- Application thickness
- Up to 15 mm
- Pot life
- Approximately 5 hours
Suitable applications
- Fixing supported tiles and non-moisture-sensitive natural stone to walls, floors and worktops
- Interior, exterior, wet-area and swimming-pool installations
- Heated screeds and existing ceramic tiles with the specified preparation
Suitable substrates
- Concrete
- Cementitious screeds and renders
- Masonry
- Ceramic tile
- Natural stone
- Compressed fibre-cement sheet
Packaging
- White
- 5 kg
- White
- 25 kg
- Grey
- 25 kg
Package options shown are product data. Confirm New Zealand availability before ordering.
Limitations & preparation
- Not suitable for metal, painted surfaces, plywood walls, moisture-sensitive natural stone or glass/metal tiles with water-sensitive backing.
- Certain natural stones, including limestone, thin marble, travertine and some granite, may be susceptible to water staining. Confirm compatibility before installation if stone sensitivity is uncertain.
- Some substrates require the primers, membranes or uncoupling layer specified in the TDS.
Read the current Technical Data Sheet before specification or use.
Technical documents
Application guidance
- Natural stone on an interior fibre-cement wall
Interior installation of hard, non-moisture-sensitive natural stone over a suitable fibre-cement wall system using Bauflex Fiber.
- Tiling over existing ceramic tiles
Dry-interior tile-over-tile installation using Super Grip followed by Bauflex Fiber.
Related system products
- Super Grip
The TDS specifies a prepared layer of Super Grip for this substrate. When applying over an old layer of ceramic tiles.
Need help with Bauflex Fiber?
Confirm product suitability, availability or project-specific requirements with NZ Bauer Components.