Tile Adhesives
Super Acrylic
Polymer-modified cement-based adhesive for ceramic, porcelain, granite and non-moisture-sensitive natural stone on interior and exterior walls and floors.
A C2TE adhesive with extended open time for installation over supported concrete, masonry, renders and cement-based sheet substrates.
- Classification
- C2TE to EN 12004
- Consumption
- 1.5-4.0 kg/m²
- Application thickness
- Up to 12 mm
- Pot life
- Approximately 4 hours
Product specification
Technical information
Performance
- Classification
- C2TE to EN 12004
- Consumption
- 1.5-4.0 kg/m²
- Application thickness
- Up to 12 mm
- Pot life
- Approximately 4 hours
Suitable applications
- Fixing ceramic tiles on walls, floors and worktops
- Interior and exterior tile installations
- Dry and wet environments when the specified preparation is followed
Suitable substrates
- Concrete
- Cementitious screeds and renders
- Masonry
Packaging
- White
- 25 kg
- Grey
- 25 kg
Package options shown are product data. Confirm New Zealand availability before ordering.
Limitations & preparation
- Not suitable for timber, metal, painted surfaces, plastic, resilient materials, plywood, existing glazed tiles or carpets.
- Not suitable for uncured screeds, renders or concrete affected by drying shrinkage.
- Not suitable for organic-based waterproofing products.
- Certain natural stones, including limestone, thin marble, travertine and some granite, may be susceptible to water staining. Confirm compatibility before installation if stone sensitivity is uncertain.
Read the current Technical Data Sheet before specification or use.
Technical documents
Application guidance
- Porcelain tiles on an interior concrete floor
Dry-interior installation for porcelain tiles up to 600 × 600 mm on cured, SR1-flat concrete using Super Grip, Super Acrylic and Perla grout.
Need help with Super Acrylic?
Confirm product suitability, availability or project-specific requirements with NZ Bauer Components.