Tile Grouts
Perla
High-performance, water-repellent cement-based grout for 1-15 mm joints in ceramic, porcelain, mosaic and natural-stone installations.
A CG2 WA grout for interior and exterior walls and floors, with high mechanical strength, stable colour and water repellency.
- Classification
- CG2 WA to EN 13888
- Joint width
- 1-15 mm
- Mixing water
- Approximately 1.5 L per 5 kg bag
- Pot life
- Approximately 1.5 hours
Product specification
Technical information
Performance
- Classification
- CG2 WA to EN 13888
- Joint width
- 1-15 mm
- Mixing water
- Approximately 1.5 L per 5 kg bag
- Pot life
- Approximately 1.5 hours
- Ready for use
- After approximately 3 days
Suitable applications
- Grouting 1-15 mm joints in ceramic tile and porcelain installations
- Grouting supported glass mosaic and natural-stone installations
- Interior and exterior wall and floor joints
Suitable substrates
- Ceramic tile
- Natural stone
Colours and packaging
Stocked in New Zealand
Regular local range in 5 kg packs. Confirm current stock before ordering.
- White
- 5 kg
- Light Grey
- 5 kg
- Manhattan
- 5 kg
- Grey Arzan
- 5 kg
- Beige
- 5 kg
- Ivory
- 5 kg
- Jasmine
- 5 kg
- Pearl Grey
- 5 kg
- Dark Grey
- 5 kg
- Cement Grey
- 5 kg
- Black
- 5 kg
- Anthracite
- 5 kg
Available by indent order
Additional Bauer colours can be ordered in 5 kg packs. Lead time and availability are confirmed by enquiry.
- Bahama
- 5 kg
- Light Brown
- 5 kg
- Dark Brown
- 5 kg
- Caramel
- 5 kg
- Terracotta
- 5 kg
- Cotto
- 5 kg
- Brown/Black
- 5 kg
- Ice White
- 5 kg
- Ocher
- 5 kg
- Olive Green
- 5 kg
- Mocha
- 5 kg
- Beige Sand
- 5 kg
- Vanilla
- 5 kg
- Cypress
- 5 kg
- Light Blue
- 5 kg
- Manolia
- 5 kg
- Magnet Grey
- 5 kg
- Chocolate
- 5 kg
On-screen colours are indicative only. Select grout from a physical sample before ordering or installation.
Limitations & preparation
- Apply only after the tile adhesive has reached its stated grouting time and is thoroughly dry.
- Clean the joints before grouting and follow the TDS water ratio, working time and cleaning method.
- Colour appearance can vary by screen, batch, substrate and site conditions; confirm the selected colour from a physical sample before ordering or installation.
Read the current Technical Data Sheet before specification or use.
Technical documents
Application guidance
- Porcelain tiles on an interior concrete floor
Dry-interior installation for porcelain tiles up to 600 × 600 mm on cured, SR1-flat concrete using Super Grip, Super Acrylic and Perla grout.
- Natural stone on an interior fibre-cement wall
Interior installation of hard, non-moisture-sensitive natural stone over a suitable fibre-cement wall system using Bauflex Fiber.
Need help with Perla?
Confirm product suitability, availability or project-specific requirements with NZ Bauer Components.