Protective Sealers
Nanoline 900 W
Clear water- and oil-repellent sealer for natural stone, marble, granite, unglazed tile and other supported mineral surfaces.
A penetrating silane/siloxane treatment that helps protect against moisture, oil and staining without forming a surface film or significantly altering the natural appearance.
- Consumption
- 0.05-0.1 kg/m²
- Curing time
- 5-10 hours
- Chemical base
- Silane/siloxane water dispersion
- Density
- 1.0 kg/L
Product specification
Technical information
Performance
- Consumption
- 0.05-0.1 kg/m²
- Curing time
- 5-10 hours
- Chemical base
- Silane/siloxane water dispersion
- Density
- 1.0 kg/L
Suitable applications
- Water- and oil-repellent treatment of supported stone and unglazed ceramic surfaces
- Protection of supported facades against rain and soiling
- Interior or exterior treatment of supported horizontal and vertical surfaces
Suitable substrates
- Concrete
- Cementitious screeds and renders
- Ceramic tile
- Masonry
- Natural stone
Packaging
- Transparent when dry
- 1 kg
- Transparent when dry
- 5 kg
- Transparent when dry
- 20 kg
Package options shown are product data. Confirm New Zealand availability before ordering.
Limitations & preparation
- Apply only to smooth, stable and completely dry surfaces prepared as specified in the TDS.
- Do not apply during extreme sunlight above 35°C, rain, or when temperatures are expected to fall below 0°C.
Read the current Technical Data Sheet before specification or use.
Technical documents
Application guidance
- Natural stone on an interior fibre-cement wall
Interior installation of hard, non-moisture-sensitive natural stone over a suitable fibre-cement wall system using Bauflex Fiber.
Need help with Nanoline 900 W?
Confirm product suitability, availability or project-specific requirements with NZ Bauer Components.