Screeds & Levelling
Hardox Level Fast
Pre-mixed, rapid-drying screed mortar — simply add water — for forming bonded or floating floor screeds from 10-80 mm.
A CT-C30-F6 screed for interior and exterior floors where tiles, natural stone, timber, vinyl, carpet or other supported floor coverings need to be installed quickly.
- Classification
- CT-C30-F6 to EN 13813
- Application thickness
- 10-80 mm
- Consumption
- Approximately 18-20 kg/m²/cm
- Foot traffic
- After approximately 12 hours
Product specification
Technical information
Performance
- Classification
- CT-C30-F6 to EN 13813
- Application thickness
- 10-80 mm
- Consumption
- Approximately 18-20 kg/m²/cm
- Foot traffic
- After approximately 12 hours
Suitable applications
- Filling, levelling and creating slopes on floors to be covered
- Bonded or floating screeds on new or existing floor slabs
- Screeds over underfloor heating systems
Suitable substrates
- Concrete
- Cementitious screeds and renders
Packaging
- Grey
- 25 kg
Package options shown are product data. Confirm New Zealand availability before ordering.
Limitations & preparation
- Do not use over a substrate subject to rising damp without the waterproof membrane specified in the TDS.
- Apply in layers from 10-80 mm and use the prescribed water quantity.
Read the current Technical Data Sheet before specification or use.
Technical documents
Application guidance
No published application guide is currently linked to this product. Use the current Technical Data Sheet or discuss the project with NZ Bauer Components.
Need help with Hardox Level Fast?
Confirm product suitability, availability or project-specific requirements with NZ Bauer Components.